Free cookie consent management tool by TermsFeed Cookies
Megawatt solar energy storage system.jpg
Megawatt solar energy storage system.jpg

1mwh 2mhw 9MW 10MW Ess Container Solar Hybrid Energy Battery Manufacturer

1mwh 2mhw 9MW 10MW Ess Container Solar Hybrid Energy Battery Manufacturer

Place Of Origin: Foshan, Guangdong Province, China

BrandName: Tanfon Solar

MOQ: 1 set,Accpet OEM &ODM

Certificate: TUV, ETL, ISO, CE, RoHS

Payment: T/T, L/C, Paypal, Western Union

15 years

industry leading technology

24 hours

uninterruptible power supply

0 distance

online service

(TANFON 2.5MW solar energy storage project in Chad)

 

1mwh 2mhw 9MW 10MW Ess Container Solar Hybrid Energy Battery Manufacturer

 

This scheme is applicable to the distribution system composed of photovoltaic, energy storage, power load and power grid(generator).
The application of the system in the power grid mainly includes the following scenarios:
Peak shaving and valley filling: by charging and storing energy at valley time and discharging energy at peak time, the electricity cost of customers can be reduced and the electricity charge at the power consumption end can be saved for customers.
Demand response: when the short-term power consumption is greater than the transformer capacity, the energy storage system will discharge rapidly to meet the load power demand
Dynamic capacity increase: energy storage equipment is used to replace the capacity of transformer in peak period to help customers reduce and reduce the expansion cycle and cost of transformer investment.


Off grid standby power supply: when the power supply of the power grid is interrupted, provide uninterrupted short-term power supply for important loads to reduce the economic losses caused by sudden power failure of loads.
The solar generation is given priority to the user's load to achieve the maximum economic operation, and the excess energy is stored in the daytime; 
When the photovoltaic power generation does not meet the load use, the load is powered by photovoltaic + energy storage; If the photovoltaic + energy storage does not fully meet the use of the load,it will be introduced by the mains to provide reliable power supply for the load; When the solar is redundant and the energy storage battery is full, and the photovoltaic surplus power is sale to grid.

 

1mwh 2mhw 9MW 10MW Ess Container Solar Hybrid Energy Battery Manufacturer

FS550W PERC Shingled solar panel(USA TR Technology panel)
Vmp:39.47V        Voc:48.077V  Imp:13.942A       Isc:14.672
210*210 cells     Efficiency:20.54%
weight:26KG   Size:2239*1042*35mm each 15pcs in series
Strong anti-cracking advantage  
 25 years product warranty 

Model: 500KW-4IN*4

Possess multiple protection functions such as voltage loss detection opening, voltage detection closing, overcurrent protection, overvoltage protection, island protection, anti-backflow protection, etc.

4 PCS 200A breaker, 1pcs 800A Breaker

MPPT PV On grid inverter model:125KW*16

MPPT efficiency; >99.9%,

Max input voltage :1100V

various protection functions;

Size:970*640*345mm ,weight:84KG

Pure sine wave 500KW inverter (in the container)*4

3 phase 400V 3W+N+PE 380V/400V,50/60HZ

MPPT Efficiency 98%

Use copper transformer; Max output current 800Amp

Protection against short-circuit, over load, high-voltage and low-voltage protection

With ESS  extend warranty:5 years

40FT- ESS container soltuion 2.4MWH

716.8V/3360AH

Max. Charge Voltage:817.6V  Discharge cut-off voltage:627.2V  

safety discharge current:3360A,

safety discharge coefficient:0.5C

Size:12192*2438*2591mm  

Charge Current:1680A  Weight:23000KG

The container is mainly composed of double-layer insulation system, monitoring system, fire protection system, access control system, construction wiring of lighting

system,equipment frame and other load-bearing frame and bridge;Can be added to the ceiling, reserved ceiling 

and box link fixed installation location, bulk design, on-site

assembly;The equipment is installed on the load bearing frame, which is installed (welded) on the steel bottom plate, and the fixed installation position of the monitoring

700KW 700KVA Off Grid Solar Power System With Battery Storage

Ground rack installation (2pcs in one set bracket)
including complete fittings
(other type of rack can be customized as perclient's requirement )

1)1set battery connect cable ,2*25mm²cable 10M*10PCS

2)4mm² PV cable 6000M, 2*250mm²cable 300M

3)1set MC4 Tools ,terminals and MC4

4)2P1200A switch Box *4pcs,2P100A s witch Box *20pcs

5)on container box all connect cable

 

Frequently asked questions

Read more commonly asked questions or learn about what solar storage is.

Request a Quote

we will get back to you as soon as possible

loading